Series 8 Open Hub LED Console:
Csafe Activation: Csafe may need to be turned on. Do so by accessing maintenance mode (press 0, 2 and OK at the same time).
Peripheral Compatibility: Console has a power port and a Csafe port. Ensure that Cardio Theater is plugged into the power only port.
CSAFE MODE: 1
Install using console Csafe port. Mount externally, tuck Relay out of view.
Install Note - Firmware Version:
Self powered Star track equipment with the Open Hub Console (such as upright bikes, recumbent bikes and ellipticals) are sometimes shipped with an incompatible firmware version.
- Check the following if the Relay is unresponsive:
- Ensure that Csafe is activated.
- Swap the Relay into the alternate port (power).
- Try the Relay on a functional piece of equipment and ensure that the Relay functions.
If this equipment type does not function properly with the Relay then it is possible that it will require a firmware update.
Install Note - Port Swap:
Sometimes the Csafe port and the power port on the console get swapped internally. If the Relay does not receive data on the Csafe port try the data port.