Star Trac E-SM Stepmill

Brand: Star Trac Model: E-SM Type: Stepmill

The legacy E-SM model does not have Csafe on the console.

To access Csafe:

1. Open up right side base shroud. (Depress center button of fastener to release).
2. There will be a blue patch cable connected to a control board. It is suggested that you do not use this cable to mount the Relay. Instead trace the cable to the source on the board, unplug the cable and connect the Relays using the provided 12" patch cable. Mound the Relay out of the way of any moving parts.