The T-Max device is a front desk controller for wellness amenities such as massage chairs and tanning beds. Ecofit is able to extract utilization data from these devices via the T-Max device for use within the Ecofit system.
The set up of the T-Max tracking system is fairly straight forward but the parts required are dependant on the configuration of your facility and which peripherals are in use (such as Radianse).
Figure out which statement best defines your facility configuration to identify which parts you will require for your facility (don't worry, we will supply that parts):
Option 1: I do not have a Radianse system. I would like to install the Gateway at the front desk, next to the T-Max controller (Requires a power outlet and DHCP hardwired internet connection).
Option 2: I do not have a Radianse system. I would like to install the Gateway in the IT closet (must be within 100ft of front desk).
Option 3: I have a Radianse system. I would like to would like to install the Gateway at the front desk, next to the T-Max controller (Requires a power outlet and DHCP hardwired internet connection).
Option 4: I have a Radianse system. I would like to install the Gateway in the IT closet (must be within 100ft of front desk).
Equipment not controlled through T-Max:
Any equipment not connected to the T-Max controller can be registered as a movement device using our Tracker sensor hardware. Registration of these units are completed through the Ecofit Installation App.
Comments
0 comments
Please sign in to leave a comment.