Parts you will receive:
1 - Ecofit Gateway
1 - USB to Serial Cable
1 - Serial Splitter
1 - Serial Cable
A note about Front Desk installation:
In order to install the Gateway at the front desk you will need to ensure that it has access to a power outlet and hardwired DHCP Ethernet connection. The Ecofit Gateway will come with a power supply and 5 ft Ethernet cable. Other networking devices must be provided by the client.
Set Up:
1 - Set up the Gateway as per Gateway Set-up Instructions.
2 - Disconnect the Radianse Serial Cable from the T-Max controller.
3 - Connect one end of the Serial Splitter to the Radianse Serial Cable.
4 - Connect one end of the serial cable to the Serial Splitter and the other end to the Serial port on the T-Max controller.
5 - Connect the Serial end of the USB to Serial Cable to the final port on the Serial Splitter and connect the USB end to the Gateway USB port.
Comments
0 comments
Please sign in to leave a comment.