T-Max API Set-up: Radianse, IT Room Install

Parts you will receive:

1 - Ecofit Gateway

1 - USB to Serial Cable with Wireless Bridge Assembly

Contains:

1 - USB to Serial Cable

1 - Wireless Bridge

1 - Wireless Bridge Power Supply

1 - Wireless Bridge to T-Max Assembly with Radianse pass through

Contains:

1 - Serial cable

1 - Serial cable gender changer

1 - Wireless bridge

1 - Wireless bridge power supply

1 - Serial Splitter

A note about IT room installation:

Please ensure that the IT room is within approx. 100ft of the T-Max unit. If there are range concerns either install the Gateway at the front desk or contact Ecofit Support for alternate options.

Set Up:

In the IT Room:

1 - Set up the Gateway in the IT Room as per Gateway Set-up Instructions.

2 - Connect the USB to Serial Cable with Wireless Bridge assembly to the Gateway.

2.5 - Connect the Gateway Wireless Bridge to power outlet.

At the Front Desk:

1 - Disconnect the Radianse Serial Cable from the T-Max controller.

2 - Connect one end of the Serial Splitter to the Radianse Serial Cable.

3 - Connect one end of the serial cable to the Serial Splitter and the other end to the Serial port on the T-Max controller.

4 - Connect the paired Wireless Bridge to the final open spot on the serial splitter using the Serial Gender Changer.

4.5 - Connect the paired Wireless bridge to power outlet.