What is Equipment Status?

The Equipment Status shows you the current data status of your equipment at a glance. The equipment statuses are split into 2 types: Automated and Manual. These 2 types are sorted into the three categories as shown above; Operational, Warning and Manual.

Automated:

Automated statuses are used on connected equipment only. Each status relates to the last time the equipment reported usage.

There are three possible Automated statuses:

Good: The Equipment has reported good data in the last 72 hours.

Check: The equipment has not been used for over 72 hours.

Gateway Offline: If a Gateway has lost connection at a facility all associated sensors will transition to "Gateway Offline". 

There are 4 possible manual statuses:

These statuses are all set using the Set Manual Status action.

In Service: This the the default non-connected status. If a connected piece of equipment is set to In Service it will adopt the appropriate automated status.

Storage: This status can be used to identify equipment that is off the floor in a storage room. See the article on Storage Facilities for information on off-site equipment storage options.

Servicing: The equipment it out of order due to servicing.

Missing Sensor: It has been identified that the sensor (Ecofit Tracker or Relay) has been removed from the equipment and is in need of replacement.