4 - Basic Tracker Installation

	Before you begin: Always perform a full range of movement test on the equipment before mounting to ensure the Tracker is not installed in a crush/pinch zone.
	Step 1: Clean mounting area well with 91% isopropyl alcohol ensuring all grease and dust has been removed. Allow to dry completely.
	Step 2: Apply 3 layers of Adhesive Promoter to mounting area and allow to dry completely. Ensure that you mount the Tracker within 5 minutes of applying promoter.
	Step 3: Remove adhesive backing and press Tracker onto mounting area applying at least 15 lbs of force.
	Step 4: Apply the equipment sticker onto the frame of the equipment in a readable location such as in line with the equipment serial label.